Wayne Dalton garage door remote

How to Program a Quantum Garage Door Model 3316

Programming synchronizes your 3316 to its numerous entry devices.Programming synchronizes your 3316 to its numerous entry devices.

Chiefly known for producing garage doors, Wayne Dalton once offered a lineup of garage door openers. The 3316 model, part of the Quantum series, is a 1/2-horsepower residential garage opener, manufactured in 2003. It features a double-angle trolley rail assembly and high-efficiency motor in addition to a wireless transmitter remote and a wall station. Because Wayne Dalton no longer produces garage door openers, you may find yourself at a loss when it comes to programming the unit to take advantage of this functionality. Fortunately, advice from the manufacturer provides insight on the programming process.

Pair Your Wall Station

Before you can sync your Quantum 3316 to its wall station, you must change the station's security code. To do so, hold the station's light button for about 10 seconds until its LED light begins to blink, then release the button. Hold the light button again for another five seconds until the LED light blinks again. Release the button and the LED will blink on and off three times, indicating the end of the process. You can now program the wall station to sync with the opener. Press the program switch on the motor, which causes the red program status light and overhead lamp to turn on for one minute. While those lights are on, press the light button on the wall station and the program status light will blink on and off three times. Press the light button once more to complete this operation.

Program Your Transmitter

Like the opener and wall station, you must first change your Quantum 3316's security code before programming its transmitter remote. Hold the large central button on the transmitter for about 10 seconds until its LED light blinks rapidly, then release the button and hold it again for about five seconds until the light blinks once again. Release the button and the LED will blink on and off three times to indicate a successful security code change. To pair the transmitter to the motor, press the switch on the motor, causing the red program status and overhead lights to activate. As these lights shine, which they will do for one minute, press the button on the transmitter that you wish to use to open the garage door. When the program status light blinks on and off three times, press the same transmitter button again to confirm your choice. You can now use the transmitter to open the door.

Queue Up Keyless Entry

If your Quantum 3316 includes keyless entry, you'll have to program this feature before use. Start the process by pressing the program switch on the motor. While the program status light and overhead light remain lit, enter the five-digit personal identification number of your choice on the keyless entry station's numeric keypad - you'll have a one-minute window to do so while the lights are on. The program status light will blink on and off three times when it has successfully learned this code. Wait five seconds, then press any button on the keypad - if successfully programmed, the garage door will move to the up position. If you make a mistake when entering your desired PIN, hold the 7/8 and 9/10 buttons down for two seconds to reset the keyless entry and restart the programming process from the beginning.

Track Down Wayne Dalton

If you have trouble programming your 3000-series opener or run into other operational issues, contact the Wayne Dalton company for further assistance. As Wayne Dalton no longer manufactures garage door openers, the company hosts a special website dedicated to customer service for previous models, accessible at GDOSupport.com. At the site, you can submit a query via an online email form. Because the 3316's warranty extends for up to 10 years, Wayne Dalton no longer covers the cost of service or repairs.


Centurian Services
Wayne Dalton WAYNE DALTON Remote Control 372MHz/3BTM 327310
Home Improvement (Wayne Dalton)
  • WAYNE DALTON 3 button garage door opener remote control 372MHz ONLY
  • Compatible remote controls numbers 300643, 3BTM-0372 C, KJ8HHT-3720
  • Compatible models 3214, 3314, 3316, 3014, 3018, 3220C, 3221C, 3C, 3224C, 3320B, 3322B and 3324B.
  • Battery, visor clip, key ring, and instructions included.
  • Size 1 5/8 x 2 1/2 Keyless Entry 327607, Older part number 3BTM, 300643
You might also like:
A Wayne Dalton Garage Door in Oak Brook,IL Real Wood
A Wayne Dalton Garage Door in Oak Brook,IL Real Wood ...
Wayne Dalton Garage Doors.
Wayne Dalton Garage Doors.
Wayne Dalton Wayne-Dalton 3973CR 3 Button Transmitter
Home Improvement (Wayne Dalton)
  • Control your garage door opener and homesettings from your car
  • For use with wireless gateway WDHA-12R
  • For use with Wayne-Dalton Z-wave enabled garage door opener
  • For use with Wayne-Dalton garage door conversion module WDRR-372R
Wayne Dalton WAYNE DALTON Garage Door Openers Keyless Entry 303MHz/ 297138
Home Improvement (Wayne Dalton)
  • Wayne Dalton Wireless Keyless Entry. Same as model number 02-3039U.
  • Compatible with remote controls model numbers JCQMK-5050, 311085, 299264.
  • Compatible with Quantum and Classic Drive models 3212, 3213, 3312, 3313, 3412, 3414, 3012, 3016, 3512 and 3514.
  • COMPATIBLE WITH 303 MHZ FREQUENCY ONLY.
  • Battery, mounting screws, and coding instructions included.
Wayne Dalton WAYNE DALTON Garage Door Openers Wireless Keyless Entry 5 Button 372MH
Home Improvement (Wayne Dalton)
  • Wayne Dalton 5-button Wireless Keyless Entry. 372MHz Frequency ONLY.
  • Same as model #3966, KEP3, 3966-372C and 309964
  • iDrive Torsion idrive DoorMaster prodrive series.
  • Receiver antenna MUST be yellow or white. Will NOT work with green antenna wire.
  • Battery, mounting screws, and coding instructions included.
Wayne Dalton WAYNE DALTON Garage Door Openers 306132 Universal Motor Control Board
Home Improvement (Wayne Dalton)
  • Wayne Dalton universal motor control board.
  • Compatible with Wayne Dalton Quantum Classicdrive prodrive chain or belt drive garage door openers.
  • Compatible with 303MHz or 372MHz frequency openers.
  • Not compatible with DoorMaster or idrive series garage door openers.
  • Same as part number 279131U.
Related Posts
  • avatar I have a wayne dalton model 2113 garage door opener with 10 position dip switches, and i have a new wayne dalton remote , how do i program it
    • Some remotes have a small door that covers a row of tiny switches, usually 8. You can flip these in a sequence to make a code that matches the receiver.
      Other types of systems have a procedure where you press a program button on the receiver, then press the remote button, and this synchronizes the two.
      Your local Home Depot probably sells Wayne Dalton, ask if they'll let you copy some instructions. Or wait fo the web site to come back up

  • avatar how do I program a wayne dalton garage door remote? | Yahoo Answers
    • The Wayne Dalton web site seems to be down at the moment.
      Some remotes have a small door that covers a row of tiny switches, usually 8. You can flip these in a sequence to make a code that matches the receiver.
      Other types of systems have a procedure where you press a program button on the receiver, then press the remote button, and this synchronizes the two.
      Your local Home Depot probably sells Wayne Dalton, ask if they'll let you copy some instructions. Or wait fo the web site to come back up